Space, Cement Self-Leveling Floor
- For interior use
- Environmentally safe
- High strength
- Enhanced adhesion
Technical Data for Space Cement Self-Leveling Floor:
Application of Space Cement Self-Leveling Floor:
Used for the final leveling of concrete and cement-sand floor substrates in dry rooms, providing a suitable base for coverings such as ceramic tile, textile carpets, linoleum, and parquet. For interior use in dry environments.
The substrate should be dry, solid, and free from dust, dirt, and lime. Remove any weak sections mechanically. Cracks in the substrate should be opened and filled with the same mixture. Pre-treat the surface with a deep-penetrating primer, and highly absorbent surfaces should be primed twice.
Mixing Instructions for Space Cement Self-Leveling Floor:
The dry mix is combined with water manually or using a low-speed electric drill at a ratio of 220-240 grams of water per 1 kg of dry mix until a uniform, plastic mass is obtained. The prepared mixture is allowed to sit for 5 minutes and then mixed again.
Application Method for Space Cement Self-Leveling Floor:
Pour the prepared solution evenly and continuously to the required height, avoiding breaks in application. Distribute the solution across the surface with a notched trowel. Roll the freshly applied layer with a spiked roller to remove air bubbles.
It is made with a cement-sand base, fillers, and a complex of special polymer additives that ensure excellent adhesion to the substrate, strength, and reliability in application. The mix contains no harmful substances.