Perfo, Tile Adhesive
- Water-resistant
- High adhesion
- Application thickness: 4-6 mm
- Color: gray
Technical Data for Perfo Tile Adhesive:
Application of Perfo Tile Adhesive:
Used for ceramic tile installation on plastered brick and concrete walls, as well as floors in dry and wet areas. Suitable for both interior and exterior use.
The substrate should be solid, dry, and free from dirt, dust, oil, bitumen stains, and remnants of old paint. Surface irregularities, cracks, pits, and other defects should be corrected with a cement leveling compound.
The dry mix is combined with water manually or using a low-speed electric drill at a ratio of 200-220 grams of water per 1 kg of dry mix until a uniform, plastic mass is obtained. The prepared mixture is allowed to sit for 5 minutes and then mixed again.
Application Method for Perfo Tile Adhesive:
Apply the adhesive to the prepared substrate using a notched trowel. The recommended application thickness is 4-6 mm, depending on tile size. Avoid applying adhesive to large areas at once, as the adhesive properties remain effective on the surface for only 10 minutes. Tiles can be adjusted within 10 minutes of placement. Grouting can be done 24 hours after tiling.
It is made with a cement-sand base and special polymer additives that ensure good adhesion to the substrate, strength, elasticity and reliability. The mix contains no harmful substances.